View B39212B9412M510_1215665.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SAW Components
SAW Rx Filter
WCDMA Band I
Series/Type: Ordering code: Date: Version:
B9412 B39212B9412M510 Aug 24, 2006 2.2
(c) EPCOS AG 2005. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
Application
s Low-loss RF filter for mobile telephone
B9412 2140.0 MHz
WCDMA system (Band I), receive path (RX)
s Usable passband 60 MHz s Balanced to balanced operation s Pb-free
Features
0,325
Package size 1.4 x 1.1 x 0.4 mm3 Package code DCT6A RoHS compatible Approx. weight 0.003 g Package for Surface Mount Technology (SMT) s Ni, gold-plated terminals s Electrostatic Sensitive Device (ESD)
s s s s s
3
0,575
0,25 12
bottom view
6
5
4
0,5 0,5
0,4 max
side view
1,4
1,1
top view
Pin configuration
s 1,6 s 3,4 s 2,5
Input, balanced Output, balanced Case ground
1
3
6
4
2,5
Please read cautions and warnings and important notes at the end of this document.
2
Aug 24, 2006
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance:
B9412 2140.0 MHz
T = -10 to +85 C ZS = 100 (balanced) ZL = 100 (balanced)
min. Center frequency Maximum insertion attenuation 2110.0 ... 2170.0 Amplitude ripple (p-p) 2110.0 ... 2170.0 fC max MHz MHz 5MHz -- -- -- -- --
typ. @ 25C 2140.0
max. -- MHz
2.1
2.5
dB
0.9
1.3
dB
Amplitude ripple per 5 MHz channel (p-p) 2110.0 ... 2170.0 MHz Group delay variation over frequency on 5 MHz channel 2110.0 ... 2170.0 MHz Output phase balance ((Sout2)-(Sout1)+180) 2110.0 ... 2170.0 MHz Output amplitude balance (|Sout2/Sout1|) 2110.0 ... 2170.0 MHz Input VSWR 2110.0 ... 2170.0 Output VSWR 2110.0 ... 2170.0 Attenuation 0.3 1920.0 1980.0 2400.0 ... ... ... ... 1920.0 1980.0 2075.0 6000.0 MHz MHz MHz MHz MHz MHz
0.7
0.9
dB
14
20
ns
-10
5 0.5
10
-1.0 vswrIN -- vswrOUT -- min 25 30 13 20
1.0
dB
1.8
2.1
1.8
2.1
32 33 35 33
-- -- -- --
dB dB dB dB
Please read cautions and warnings and important notes at the end of this document.
3
Aug 24, 2006
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
B9412 2140.0 MHz
Maximum ratings Operable temperature range T Storage temperature range DC voltage ESD voltage Input Power
1)
-10/+85 -40/+85 5 50 1) 13
C C V V dBm Machine model, 10 pulses CW signal
Tstg VDC VESD PIN
acc. to JESD22-A115A (Machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and important notes at the end of this document.
4
Aug 24, 2006
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
Transfer function (narrowband)
B9412 2140.0 MHz
Transfer function (wideband)
Please read cautions and warnings and important notes at the end of this document.
5
Aug 24, 2006
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
Smith chart S11 function
B9412 2140.0 MHz
S22 function
Please read cautions and warnings and important notes at the end of this document.
6
Aug 24, 2006
SAW Components Low-Loss Filter for Mobile Communication Data Sheet
References Type Ordering code Marking and Package Packaging Date Codes S-Parameters Soldering profile RoHS compatible B9412 B39212B9412M510 C61157-A8-A2 F61074-V8212-Z000 L_1126 B9412_NB.s4p B9412_WB.s4p S_6001 defined as compatible with the following documents:
B9412 2140.0 MHz
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY (c) EPCOS AG 2006. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and important notes at the end of this document.
7
Aug 24, 2006
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
2.
3. 4.
5.
6.
7.
8
Aug 24, 2006

▲Up To Search▲

Price & Availability of B39212B9412M510

	To Download B39212B9412M510 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .